Abreu, B., B. Lamas, et al. (2013). "Experimental characterization of convective heat transfer with MWCNT based nanofluids under laminar flow conditions." Heat and Mass Transfer: 1-10.
Ahmadi, H., A. Rashidi, et al. (2013). "Experimental evaluation of engine oil properties containing copper oxide nanoparticles as a nanoadditive." International Journal of Industrial Chemistry 4(1): 1-6.
Ahmadi, H., A. Rashidi, et al. (2013). "Preparation and thermal properties of oil-based nanofluid from multi-walled carbon nanotubes and engine oil as nano-lubricant." International Communications in Heat and Mass Transfer.
Aishwarya, V., K. Suganthi, et al. (2013). "Transport properties of nano manganese ferrite–propylene glycol dispersion (nanofluids): new observations and discussion." Journal of Nanoparticle Research 15(7): 1-14.
Akhavan Zanjani, H., M. Saffar-Avval, et al. (2013). "Turbulent Convective Heat Transfer and Pressure Drop of Graphene-Water Nanofluid Flowing inside a Horizontal Circular Tube." Journal of Dispersion Science and Technology(just-accepted).
Alfaifi, B., J. Tang, et al. (2013). "Radio frequency disinfestation treatments for dried fruit: Model development and validation." Journal of Food Engineering.
Barry-Macaulay, D., A. Bouazza, et al. (2013). "Thermal conductivity of soils and rocks from the Melbourne (Australia) Region." Engineering Geology.
Befus, K. M., M. B. Cardenas, et al. (2013). "Heat transport dynamics at a sandy intertidal zone." Water Resources Research.
Branson, B. T., P. S. Beauchamp, et al. (2013). "Nanodiamond Nanofluids for Enhanced Thermal Conductivity." ACS nano 7(4): 3183-3189.
Casás, L., M. Pozo, et al. (2013). "Thermal behavior of mixtures of bentonitic clay and saline solutions." Applied Clay Science 72: 18-25.
Choi, M. J., S. R. Guntur, et al. (2013). "A Tissue Mimicking Polyacrylamide Hydrogel Phantom for Visualizing Thermal Lesions Generated by High Intensity Focused Ultrasound." Ultrasound in medicine & biology 39(3): 439-448.
Cingarapu, S., D. Singh, et al. (2013). "Nanofluids with encapsulated tin nanoparticles for advanced heat transfer and thermal energy storage." International Journal of Energy Research.
Engchuan, W. and W. Jittanit (2013). "Electrical and Thermo-Physical Properties of Meat Ball." International Journal of Food Properties(just-accepted).
Fallahi, P., K. A. Rosentrater, et al. (2013). "Effects of Steam, Moisture, and Screw Speed on Physical Properties of DDGS-Based Extrudates." Cereal Chemistry 90(3): 186-197.
Fan, L.-W., X. Fang, et al. (2013). "Effects of various carbon nanofillers on the thermal conductivity and energy storage properties of paraffin-based nanocomposite phase change materials." Applied Energy 110: 163-172.
Feng, X. and D. W. Johnson (2013). "Characterization of dispersed and aggregated Al2O3 morphologies for predicting nanofluid thermal conductivities." Journal of Nanoparticle Research 15(6): 1-11.
Ferreira, A., P. Simões, et al. (2013). "Transport and thermal properties of quaternary phosphonium ionic liquids and IoNanofluids." The Journal of Chemical Thermodynamics.
Franc?a, J., S. Vieira, et al. (2013). "Thermal Conductivity of [C4mim][(CF3SO2) 2N] and [C2mim][EtSO4] and Their IoNanofluids with Carbon Nanotubes: Experiment and Theory." Journal of Chemical & Engineering Data 58(2): 467-476.
Gavili, A., T. D. Isfahani, et al. "The effect of real viscosity on the heat transfer of water based Al2O3 nanofluids in a two-sided lid-driven differentially heated rectangular cavity." Heat and Mass Transfer: 1-13.
Ghadimi, A. and I. H. Metselaar (2013). "The influence of surfactant and ultrasonic processing on improvement of stability, thermal conductivity and viscosity of titania nanofluid." Experimental Thermal and Fluid Science.
Guntur, S. R., K. I. Lee, et al. (2013). "Temperature-Dependent Thermal Properties of ex Vivo Liver Undergoing Thermal Ablation." Ultrasound in medicine & biology.
Halelfadl, S., A. M. Adham, et al. (2013). "Optimization of thermal performances and pressure drop of rectangular microchannel heat sink using aqueous carbon nanotubes based nanofluid." Applied Thermal Engineering.
Hernández Wong, J., V. Suarez, et al. (2013). "Heat Transfer Monitoring by means of the Hot Wire Technique and Finite Element Analysis Software." Applied Radiation and Isotopes.
Howard, J. A. and P. A. Walsh (2013). "An Experimental Investigation of Heat Transfer Enhancement Mechanisms in Microencapsulated Phase-Change Material Slurry Flows." Heat Transfer Engineering 34(2-3): 223-234.
Indhuja, A., S. KS, et al. (2013). "Viscosity and thermal conductivity of dispersions of gum arabic capped MWCNT in water: influence of MWCNT concentration and temperature." Journal of the Taiwan Institute of Chemical Engineers.
Indhuja, A., K. Suganthi, et al. (2013). "Temperature-Dependent, Thermo-Physical Properties of Acid-Treated Multi-Walled Carbon Nanotubes-Water Nanofluids." Nanoscience and Nanotechnology Letters 5(7): 813-817.
Iranidokht, V., S. Hamian, et al. (2013). "Thermal conductivity of mixed nanofluids under controlled pH conditions." International Journal of Thermal Sciences 74: 63-71.
Jamal-Abad, M. T., A. Zamzamian, et al. (2013). "Experimental studies on the heat transfer and pressure drop characteristics of Cu-water and Al-water nanofluids in a spiral coil." Experimental Thermal and Fluid Science.
Khedkar, R. S., A. S. Kiran, et al. (2013). "Thermo–Physical Characterization of Paraffin based Fe3O4 Nanofluids." Procedia Engineering 51: 342-346.
Kumar, A., A. Gupta, et al. (2013). "Use of aluminum oxide nanoparticles in wood composites to enhance the heat transfer during hot-pressing." European Journal of Wood and Wood Products: 1-6.
Kumaresan, V., S. Mohaideen Abdul Khader, et al. (2013). "Convective heat transfer characteristics of CNT nanofluids in a tubular heat exchanger of various lengths for energy efficient cooling/heating system." International Journal of Heat and Mass Transfer 60: 413-421.
Lee, J. K. and J. Q. Shang (2013). "Thermal properties of mine tailings and tire crumbs mixtures." Construction and Building Materials 48: 636-646.
Li, X.-Y., S.-Y. Zhang, et al. (2013). "Soil water and temperature dynamics in shrub-encroached grasslands and climatic implications: results from Inner Mongolia steppe ecosystem of north China." Agricultural and Forest Meteorology 171: 20-30.
LotfizadehDehkordi, B., S. Kazi, et al. (2013). "Investigation of viscosity and thermal conductivity of alumina nanofluids with addition of SDBS." Heat and Mass Transfer: 1-7.
MA, S., O. OA, et al. (2013). "Variability of Soil Thermal Properties of a Seasonally Cultivated Agricultural Teaching and Research Farm, University of Ibadan, South-western Nigeria." Global Journal of Science Frontier Research 13(8).
Maddah, H., M. Rezazadeh, et al. (2013). "The effect of silver and aluminum oxide nanoparticles on thermophysical properties of nanofluids." Journal of Nanostructure in Chemistry 3(1): 1-6.
Mahbubul, I., R. Saidur, et al. (2013). "Influence of particle concentration and temperature on thermal conductivity and viscosity of Al2O3 /R141b nanorefrigerant." International Communications in Heat and Mass Transfer.
Manimaran, R., K. Palaniradja, et al. (2013). "Experimental comparative study of heat pipe performance using CuO and TiO2 nanofluids." International Journal of Energy Research.
Manimaran, R., K. Palaniradja, et al. (2013). "Preparation and characterization of copper oxide nanofluid for heat transfer applications." Applied Nanoscience: 1-5.
Mary, A. H., K. Suganthi, et al. (2013). "Mechanistic Investigations of Viscosity and Thermal Conductivity Enhancement in Multi-Walled Carbon Nanotubes-Propylene Glycol Nanofluids." Nanoscience and Nanotechnology Letters 5(10): 1125-1129.
Moslehirad, F., M. M. Ara, et al. (2013). "Thermal nonlinear optical properties of TiO2 nanocrystals prepared through pulsed laser ablation." Laser Physics 23(5): 055402.
Nondorf, L. (2013). THERMAL CONDUCTIVITY, THERMAL GRADIENT, AND HEAT FLOW ESTIMATIONS FOR THE SMACKOVER FORMATION, SOUTHWEST ARKANSAS. Geological Society of America Abstracts with Programs.
Ozturk, S., Y. A. Hassan, et al. (2013). "Graphene-enhanced nanorefrigerants." Nanoscale 5(2): 541-547.
Paul, T. C., A. Morshed, et al. (2013). "Nanoparticle Enhanced Ionic Liquids (NEILS) as Working Fluid for the Next Generation Solar Collector." Procedia Engineering 56: 631-636.
Rashidi, A., H. Ahmadi, et al. (2013). "Thermal and rheological properties of oil-based nanofluids from different carbon nanostructures." International Communications in Heat and Mass Transfer.
Rathnakumar, P., K. Mayilsamy, et al. (2013). "Comparison of Heat Transfer and Friction Factor Characteristics of Carbon Nanotubes Based Nanofluids in a Circular Tube Fitted with Helical Screw Inserts with Spacers." Journal of Nanofluids 2(4): 274-282.
Rubio, C. M. (2013). "A Laboratory Procedure to Determine the Thermal Properties of Silt Loam Soils Based on ASTM D 5334." Science and Education 1(4): 45-48.
Sahin, B., G. G. Gültekin, et al. (2013). "Experimental Investigation of Heat Transfer and Pressure Drop Characteristics of Al2O3-Water Nanofluid." Experimental Thermal and Fluid Science.
Said, Z., M. Sajid, et al. (2013). "Experimental investigation of the thermophysical properties of AL2O< 3-nanofluid and its effect on a flat plate solar collector." International Communications in Heat and Mass Transfer.
Salehi, J., M. Heyhat, et al. (2013). "Enhancement of thermal conductivity of silver nanofluid synthesized by a one-step method with the effect of polyvinylpyrrolidone on thermal behavior." Applied Physics Letters 102: 231907.
Saxena, S. (2013). "Effect of moisture content, screw and grinder speed on physical and thermal properties of fenugreek powder." International J. Seed Spices 3(2): 13-21.
Seshadri, I., A. Gardner, et al. (2013). "Gating heat transport by manipulating convection in a magnetic nanofluid." Applied Physics Letters 102(20): 203111-203111-203114.
Sharma, M., D. Kadam, et al. (2013). "Influence of particle size on physical and sensory attributes of mango pulp powder." International Agrophysics 27(3): 323-328.
Shenoy, U. S. and A. N. Shetty (2013). "A Simple Solution Phase Synthesis of Copper Nanofluid Using Single-step Glucose Reduction Method." Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry 43(3): 343-348.
Soudzilovskaia, N. A., P. M. Bodegom, et al. (2013). "Dominant bryophyte control over high‐latitude soil temperature fluctuations predicted by heat transfer traits, field moisture regime and laws of thermal insulation." Functional Ecology.
Suganthi, K. S., M. Parthasarathy, et al. (2013). "Liquid-layering induced, temperature-dependent thermal conductivity enhancement in ZnO-propylene glycol nanofluids." Chemical Physics Letters.
Tadjarodi, A. and F. Zabihi (2013). "Thermal conductivity studies of novel nanofluids based on metallic silver decorated mesoporous silica nanoparticles." Materials Research Bulletin.
Tadjarodi, A., F. Zabihi, et al. (2013). "Experimental investigation of thermo-physical properties of platelet mesoporous SBA-15 silica particles dispersed in ethylene glycol and water mixture." Ceramics International.
Taha-Tijerina, J., L. Peña-Paras, et al. (2013). "Multifunctional nanofluids with 2D nanosheets for thermal and tribological management." Wear.
Teng, T.-P. (2013). "Thermal conductivity and phase-change properties of aqueous alumina nanofluid." Energy Conversion and Management 67: 369-375.
Theres Baby, T. and R. Sundara (2013). "Synthesis of silver nanoparticle decorated multiwalled carbon nanotubes-graphene mixture and its heat transfer studies in nanofluid." AIP Advances 3(1): 012111-012111-012110.
Tiwari, A. K., P. Ghosh, et al. (2013). "Heat transfer and pressure drop characteristics of CeO2/water nanofluid in plate heat exchanger." Applied Thermal Engineering.
Tripathi, D. and T. K. Dey (2013). "Thermal conductivity, coefficient of linear thermal expansion and mechanical properties of LDPE/Ni composites." Indian Journal of Physics: 1-11.
Wanchoo, R., R. Gupta, et al. (2013). Heat Transfer Characteristics of Nano-Fluids. Materials Science Forum, Trans Tech Publ.
Wang, B., Y. L. Cheng, et al. (2013). "Properties of rigid polyurethane foams prepared from recycled aircraft deicing agent with hexamethylene diisocyanate." Journal of Applied Polymer Science 127(3): 1458-1465.
Wang, B., J. Hao, et al. (2013). "Remarkable improvements in the stability and thermal conductivity of graphite/ethylene glycol nanofluids caused by a graphene oxide percolation structure." Dalton Transactions.
Weaver, B. K., A. A. Younan, et al. (2013). "Properties and performance of gas-expanded lubricants in tilting pad journal bearings." Tribology Transactions(just-accepted).
Wood, C., K. A. Rosentrater, et al. (2013). "Quantification of Physical and Chemical Properties, and Identification of Potentially Valuable Components from Fuel Ethanol Process Streams." Cereal Chemistry 90(1): 70-79.
Wu, G., D. E. Turcotte, et al. (2013). "UNCLASSIFIED: Distribution Statement A. Approved for public release." Journal Article 1: 2.
Yan, X., Y. Jiang, et al. (2013). "ZnO Nanorod Based Nanofluids." Journal of Nanofluids 2(1): 63-68.
Yang, C., M. Sakai, et al. (2013). "Inverse method for simultaneous determination of soil water flux density and thermal properties with a penta‐needle heat pulse probe." Water Resources Research.
Yu, W., E. V. Timofeeva, et al. (2013). "Investigations of heat transfer of copper-in-Therminol 59 nanofluids." International Journal of Heat and Mass Transfer.
Zheng, X., Y. Wang, et al. (2013). "Microwave Energy Absorption Behavior of Foamed Berry Puree Under Microwave Drying Conditions." Drying Technology 31(7): 785-794.
Zhu, H. T., D. X. Wu, et al. (2013). "Synthesis and thermal conductivity of ZnO Nanofluids." Advanced Materials Research 734: 2415-2419.
KD2 Pro熱特性分析儀2013年部分應用文獻
來(lái)源：北京力高泰科技有限公司 發(fā)布日期：2013-12-06 11:07:21 瀏覽次數：1974